Replay XD1080 Complete Video Camera System

Includes:

Replacement aluminum rear cap with settings decal for the Replay XD1080. Includes O-ring.

The SnapTray Goggle Mount allows for a quick mounting solution by quickly attaching to most goggle straps (up to 42mm), head band mounts, web straps, etc. The unique Pad Kit allows you to taylor the grip, contact area, and comfort, against smooth surfaces (helmets), head-worn garments (beanie/hat), appendages, limbs (arm, wrist, leg, ankle), etc. The Goggle Mount is designed with an ultra low profile and low center of gravity to stay put for a wobble-free shot.

Included in package: 1 – SnapTray Goggle Mount with Pad Kit: 1 pair – Silicone Pad for helmets or smooth sufaces, 1 pair – Foam Wedge for head-worn straps or to achieve various angles, 1 pair – Tall Foam to fill space between head-worn straps and head.

Compatible with all HeimLock and LowBoy mounts.

Note: Fits goggle straps up to 42mm wide, goggles not included.

DeepDive 197 is an ultra rugged waterproof housing for the Replay XD1080, featuring instant access to Power, Record, Video/Photo Modes, and Frames Per Second settings, allowing you to record video or quickly switch to shooting photos, all under water down to 197 feet/60 meters.

Includes a Surf Mount

DeepDive 197 includes our new Surf Mount (adjustable TiltMount and Surf SnapTray) to allow for extreme tilt, great for longboards or shortboards. The Surf Mount isn’t limited to just surfboards… you can use the new Surf Mount with any of our other SnapTray bases for unlimited shooting angles and possibilities.

Sharp and Crisp

ProCap 197 is a professional grade, flat glass, replacement lens cap for the DeepDive 197 waterproof housing. ProCap 197 delivers crisp underwater optics while providing greater lens surface durability. The ProCap 197 is a great optional replacement cap over the stock replaceable polycarbonate caps.

The Replay XD1080 RePower (DC HW) Battery Adapter is perfect for supplying external battery power to your camera for endurance events and activities. You can use the RePower 2200 (3+ hours) or RePower 4400 (6+ hours) Battery Pack to charge or give your Replay XD1080 that extra juice. The adapter also includes a 3.5 mm mini jack to plug in an external audio source. With a 32GB microSDHC card and the RePower (DC HW) Battery Adapter you can capture extended video and time-lapse photos.

Long 4 m (13.1 ft) includes a 3.5 mm mini jack Audio-In + HDMI output
-Great for mounting in remote locations, inside jackets, firearms, down poles, motorcycles, etc.
-*LiveView compatible with the ReView Field Monitor, Teradek Cube, and any other HDMI capable device.

The Replay XD1080 RePower (DC HW) Battery Adapter is perfect for supplying external battery power to your camera for endurance events and activities. You can use the RePower 2200 (3+ hours) or RePower 4400 (6+ hours) Battery Pack to charge or give your Replay XD1080 that extra juice. The adapter also includes a 3.5 mm mini jack to plug in an external audio source. With a 32GB microSDHC card and the RePower (DC HW) Battery Adapter you can capture extended video and time-lapse photos.

Long 4 m (13.1 ft) includes a 3.5 mm mini jack Audio-In
-Great for mounting in remote locations, inside jackets, firearms, down poles, motorcycles, etc.

The RePower 4400 Battery Pack adds up to 6+ hours of extra power to your Replay XD1080. You can use the Battery Pack as a charger or an extended power source quadrupling your record time.

The RePower 4400 Battery Pack is compatible with all of the RePower (DC HW) Battery Adapters with a 2.5 mm threaded DC jack.

Note: Does not include RePower Battery Adapter or Replay XD1080.

FEATURES
Power On/Off button for storage
LED battery level indicator
Input: Mini USB 8-pin connector
Output: 2.5 mm threaded DC jack
Adds up to 6+ hours of power to your Replay XD1080 camera.

POWER
4400 mAh Rechargeable Li-ion
Charge Voltage: 5V
Charge Current: 1A
Output Power: DC 5V 1A

WEIGHTS / MEASURES
138 grams (4.9 oz)
52 mm Width (2.04 in)
34 mm Height with Clip (1.3 in)
81 mm Length (3.2 in)

The RePower 2200 Battery Pack adds up to 3+ hours of extra power to your Replay XD1080. You can use the Battery Pack as a charger or an extended power source virtually tripling your record time.

The RePower 2200 Battery Pack is compatible with all of the RePower (DC HW) Battery Adapters with a 2.5 mm threaded DC jack.

Note: Does not include RePower Battery Adapter, Mount (available soon), or Replay XD1080.

FEATURES
Power On/Off button for storage
LED battery level indicator
Input: Mini USB 8-pin connector
Output: 2.5 mm threaded DC jack
Adds up to 3+ hours of power to your Replay XD1080 camera.

POWER
2200 mAh Rechargeable Li-ion
Charge Voltage: 5V
Charge Current: 1A
Output Power: DC 5V 1A

WEIGHTS / MEASURES
76 grams (2.6 oz)
24 mm Dia. (0.94 in)
97.5 mm Length (3.8 in)
22.9 mm Mounting Dia. (0.90 in)

Rugged and lightweight billet aluminum Picatinny mount for all picatinny rails. Features 2-Way, 360° positioning for unlimited camera angles and 10° incremental Camera ring positions. Black anodized for that sleek look and anti-reflective quality.

Note: To create a full assembly, you require a HardCore Billet Camera Clamp.

A suction cup mount for Replay XD1080 with some high-end flare. We took a traditional Panavise suction-cup mount and machined a billet aluminum arm and camera clamp to create an ultra rigid mount. All of this combined provides a solid solution to capture crisp and stable video.

Note: A HardCore Billet Camera Clamp is required to complete this mounting system.

The Replay XD1080 External Audio Adapter is a rugged screw-on adapter that keeps the back of your Replay XD1080 camera sealed from the elements. It features an aluminum knurled bezel that is easy to attach. The 3.5mm mini jack has a nice positive detent to keep your powered microphone or other line-in audio source securely attached.

Note: Microphone must be used with any of our HW/Audio kits with an Audio Line-In jack.

The Replay XD External Microphone is a miniature lavalier microphone with an omnidirectional condenser. The microphone itself is engineered for use in a wide array of applications. The frequency and sensitivity response is designed to accurately reproduce the audio character of your activity with great detail and minimal noise.

Specifications:
Element: Condenser
Type: Omnidirectional
Frequency Range: 50~16,000 Hz
Impedance: 1500 Ohms±30% (@ 1,000 Hz)
Sensitivity: -65±3dB (0dB=1V/Microbar)
Plug: 3.5mm (1.8 in) Mini-jack
Length: 1.8M (72 in)
Battery LR44 or GPA76, DC1.5V

The Replay XD1080 Hardwire Start Stop Adapter (4 wire) is perfect for supplying constant power to your camera for endurance events and activities. You can mount the Dash Remote into an existing bulkhead (1.5mm~4mm) or a custom bracket. It features two integrated 4 meter long cables, one with four wires that can be wired to your specific application, and the other that attaches to the Replay XD1080.  The Dash Remote also includes a 3.5mm mini jack to plug in an external audio source and an HDMI-out port to connect and external HDMI display or external recorder/transmitter. With a 32GB microSDHC card and the Hardwire adapter you can capture up to 15 hours of continuous video.

Compatible with: Replay XD1080 Only

The Replay XD1080 Hardwire Adapter is perfect for supplying constant power to your camera for endurance events and activities. It comes with a 4 meter long cable with an attached car adapter. The adapter also includes a 3.5mm mini jack to plug in an external audio source. With a 32GB microSDHC card and the Hardwire adapter you can capture up to 15 hours of continuous video.

Connects to vehicle cigarette/power outlet.

The XD1080 ProLens 37mm Adapter Ring is designed for fitting 37mm filter and threaded lenses to the Replay XD1080. Constructed from high grade aluminum, the adapter ring can be smoothly screwed on to the XD1080. Includes O-ring.

The billet aluminum SuctionCup Mini Clamp allows you to add an extra camera or two or three to your SuctionCup Mount.

Just slide it onto the SuctionCup billet arm and add another Replay XD1080 Camera Clamp and camera for multiple camera angles.

Note: Camera, HardCore Camera Clamp or SuctionCup Mount not included. A HardCore Camera Clamp is needed to complete the mount.

The Replay windbreaker decals cover the microphone hole to suppress wind noise.

The Replay XD1080 lens covers are made from impact-resistant clear polycarbonate.

Replacement aluminum lens bezel for the Replay XD1080. Includes O-ring.

LowBoy Mount (Fixed): Our Lowest profile mount, designed to be low and out-of-the-way, offers 360º lens rotation, not including the unlimited areas you can mount 1 included SnapTray VHB base.

Included in package: 1 LowBoy Mount and 1 Flat SnapTray with 3M® VHB adhesive to securely mount to smooth surfaces: metal, paint, powdercoat, LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface.

Note; This mount is included in Complete Replay XD1080 Camera Kit.

HeimLock Mount (Swivel/Tilt): Features spherical adjustment with an eccentric cam-lock for a rock solid mount. Over 1,036,800 Mounting Positions with 360º lens rotation, 360º camera rotation, and 8º of tilt, not including the unlimited areas you can mount 1 included SnapTray VHB base.

Included in package: 1 HeimLock Mount and 1 Flat SnapTray with 3M® VHB adhesive to securely mount to smooth surfaces: metal, paint, powdercoat, LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface.

Note: This mount is included with complete Replay XD1080 Camera Kit

HardCore Billet Chassis Mount

Rugged and lightweight billet aluminum chassis mount. Features 3-Way, 360° positioning for unlimited camera angles. V-block and C-clamp shape with 10° incremental Camera ring position allows for a positive and rock solid mount. Black anodized for that sleek look and anti-reflective quality.

Available in a number of sizes:
1/2″ (12.7mm),  3/4″ (19.05mm), 7/8″ (22.22mm), 1″ (25.4mm), 1-1/8″ (28.58mm), 1-1/4″ (31.75mm), 1-3/8″ (34.93mm), 1-1/2: (38.1mm), 1-5/8″ (41.28mm), 1-3/4″ (44.45mm), 2″ (50.8mm)

Note: A Camera Clamp is required to complete the mount (not included)

Rugged and lightweight billet aluminum flat mount for tripods and universal mounting such as gaffer rigging. Features 2-Way, 360° positioning for unlimited camera angles and 10° incremental Camera ring positions. Flat bottom with machined serrations, low profile shape, including one 1/4-20 tripod hole, and two 3/8 holes for universal mounting to aid in a positive and rock solid mount.

Colour may change from that pictured to black annodisedfinish.

Does Not include Camera or HardCore Billet Camera Clamp (Required to complete the mount kit)

Rugged and lightweight billet aluminum skateboard truck mount.

Features 2-Way, 360° positioning for unlimited camera angles and 10° incremental Camera ring positions. Flat bottom, low profile shape fits around and mounts to most common skateboard trucks for a positive and rock solid mount. You can add a second Camera Clamp to capture other rad angles. Black anodized for that sleek look.

Note: Camera Clamp not included

Rugged and lightweight billet aluminum curved adhesive mount for convex surfaces. Features 2-Way, 360° positioning for unlimited camera angles and 10° incremental Camera ring positions.

Flat bottom, low profile shape with 3M VHB Adhesive allows for a positive and rock solid mount.

Black anodized for that sleek look and anti-reflective quality.

Does not include camera or HardCore Billet Camera Clamp

Included in package: 5 Flat SnapTray’s with 3M® VHB adhesive to securely mount to smooth surfaces: metal, paint, powdercoat, LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface.

Compatible with HeimLock and LowBoy mounts.

Included in package: 5 Curved SnapTray’s with 3M® VHB adhesive to securely mount to smooth convex surfaces: metal, paint, powdercoat, LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface.

Compatible with HeimLock and LowBoy mounts.

Included in package: 5 pieces of replacement 3M® VHB adhesive for SnapTray’s to securely mount to smooth convex surfaces: metal, paint, powdercoat, LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface.

Compatible with Flat and Curved SnapTray.

Included in package: 5 pieces of replacement 3M® VHB adhesive for Billet FlatMount to securely mount to smooth convex surfaces: metal, paint, powdercoat, LSE & HSE plastic. 3M® VHB adhesive ensures secure mounting and removal without harming your surface.

Compatible with HardCore Billet Flat and Curved Mount.